No tools, no electrician, no experience needed.

Complete Your Home's Protection
Install in Under 5 Minutes
Follow these simple steps to get fully protected tonight
Choose Your Spot
Pick a wall, fence or post that gets 6+ hours of direct sunlight. Mount 6–10 feet high for best motion detection.
Mark & Mount the Bracket
Use the included template to mark 2 holes, drill, and secure the bracket with the provided screws. Takes 2 minutes.
Snap the Light On
Click the LumaGuard onto the bracket and angle the solar panel to face the sun directly. No wiring needed.
Adjust the 3 Heads
Point each of the 3 light heads toward the areas you want covered — driveway, path, gate or yard.
Select Your Mode
Choose from 3 modes: motion-only, dim-to-bright, or always on. Click the button on the back to cycle through.
Sleep Easy Tonight
Your home is now protected 24/7 — powered by the sun, costing you $0 to run, every single day.
How our customers feel after protecting their home with LumaGuard.
Real Homes. Real Protection.
94%
say they feel safer at home after installing
88%
installed it without any help in under 10 minutes
81%
bought a second one for another part of their property
Results based on a survey of verified LumaGuard customers. Individual results may vary.
Loved By Our Community
"I live alone and always felt uneasy at night. The second I installed this on my backyard everything changed. It's blindingly bright and goes off the moment anything moves. I feel so much safer now."
"Was quoted $550 to get outdoor lighting wired in. Bought two of these instead. Took me 15 minutes total. My whole backyard is covered and I paid less than $50."
"Bought this for my 74-year-old mom who lives alone. She was always nervous walking to her car at night. This lights up her entire driveway the second she steps out. She calls it her guardian angel."
The smarter way to secure your home — without the electrician bill.
100% solar — zero electricity cost forever
5-minute DIY mount — no tools or permits needed
IP65 rated — fully sealed against rain, snow and dust
Requires a licensed electrician costing $300–$600+
100% solar — zero electricity cost forever
5-minute DIY mount — no tools or permits needed
IP65 rated — fully sealed against rain, snow and dust
Requires a licensed electrician costing $300–$600+
The Smart Way to Secure Your Home
Why pay an electrician thousands when you can protect your home today for $21?
- 100 ultra-bright LEDs with 270° wide coverage
- 100% solar powered — zero electricity cost forever
- Installs in 5 minutes — no electrician, no permits
- IP65 waterproof — built to survive any weather
- Motion activated in 0.5 seconds — no blind spots
- Dim, low-quality LEDs that barely light a path
- Hardwired lights that add to your electricity bill every month
- Requires a licensed electrician costing $300–$600+
- Cheap plastic housing that cracks and leaks in rain
- Narrow fixed angle — intruders walk right past the sensor
Frequently Asked Questions
Yes — 100%. The LumaGuard runs entirely on solar energy. The built-in solar panel charges the battery during the day and powers the light at night. There are no wires, no outlets, and no electricity costs. Ever.
Extremely easy. All mounting hardware is included. Mark two holes, drill, screw in the bracket, and snap the light on. Most customers are done in under 5 minutes. No electrician, no permits, no special tools needed.
Yes. The solar panel still charges on overcast days — it just takes a little longer. The light itself is IP65 waterproof rated, meaning it's fully protected against rain, sleet, dust, and snow. It's built for outdoor use year-round.
The motion sensor detects movement up to 26 feet away and activates within 0.5 seconds. The 270° wide-angle coverage means there are virtually no blind spots. It picks up people, animals, and vehicles approaching from almost any direction.
After 6–8 hours of sunlight, the battery runs the light for 8–12 hours. In motion-only mode the battery lasts significantly longer since the light only activates when triggered, not all night.
